Office Partitions
Glass and aluminium partitions that divide space, keep the light and give teams the privacy they need.
Choose the right system
Four ways to build it. Pick a type to see how it opens, where it fits best and what it includes.
Glass Partitions
Single glazed panels in slim floor and ceiling channels, creating meeting rooms and offices while daylight flows through.
Best for: Meeting rooms, manager offices and open plan zoning.
- Slim channels
- Acoustic laminated glass options
- Quick installation
Aluminium-Framed Partitions
Modular aluminium frames combining glass and solid panels, with space for integrated blinds, cabling and doors.
Best for: Offices that need a mix of privacy, storage walls and glass.
- Glass and solid panel mix
- Integrated blinds
- Double glazed option for acoustics
Frameless / Full-Glass Partitions
Glass panels joined edge to edge with clear joints and minimal or hidden channels, for a clean all-glass look.
Best for: Receptions, executive floors and premium workspaces.
- Clear butt joints
- Hidden channels
- Maximum transparency
Partition Doors (Sliding & Swing)
Glass doors that match the partition, as pivot, hinged or sliding doors, with soft-close and drop seals for acoustic privacy.
Best for: Every room in the partition line.
- Pivot, hinged or sliding
- Drop seals for sound
- Soft-close tracks
Why choose Office Partitions
Daylight for everyone
Glass keeps natural light moving through the floor plate.
Acoustic privacy
Laminated acoustic glass, double glazing and seals keep conversations in.
Fast, clean install
Prefabricated parts mean less dust and disruption in a working office.
Brand and privacy
Frosted bands, printed manifestation or switchable glass where you need it.
Easy to reconfigure
Demountable systems move with your layout as teams change.
Side by side
The highlighted column follows the type you selected above.
| Glass Partitions | Aluminium-Framed Partitions | Frameless / Full-Glass Partitions | Partition Doors (Sliding & Swing) | |
|---|---|---|---|---|
| Look | Slim frames | Framed modules | All glass | Matches the wall |
| Acoustics | Good | Very good | Good | Depends on seals |
| Privacy options | Film, frosting | Blinds, solid panels | Film, frosting | Frosted glass |
| Installation | Fast | Moderate | Moderate | With the partition |
| Relative cost | Medium | Medium | High | Per door |
Options and finishes
Glass
- Double glazed insulated units
- Low-E and solar control coatings
- Tempered and laminated safety glass
- Tinted, reflective or acoustic glass
Finishes
- Powder coating in any RAL colour
- Anodized finishes
- Wood-effect coatings
- Two colours, inside and outside, on thermal break profiles
Hardware and extras
- Frosted and printed manifestation
- Integrated blinds
- Switchable privacy glass
- Drop seals and acoustic gaskets
- Soft-close sliding tracks
From survey to handover
Survey
We visit the site, take precise measurements and review drawings, levels and wall conditions.
Design
Shop drawings, system and glass selection, structural and wind load checks where needed.
Fabricate
Profiles are cut, assembled and glazed to size under quality control before delivery.
Install
Our trained crews install, seal and adjust every unit, supervised by a project engineer.
Handover
Final inspection, operation walkthrough and aftercare support for the life of the system.
Questions clients ask
Still unsure which system fits? Send us your drawings or a photo of the opening.
How soundproof are glass partitions?
Typical manufacturer figures are around Rw 40 to 47 dB for acoustic single glazing and up to about 55 dB for double glazing. Doors and gaps lower the real result, so we detail seals carefully.
How do we get privacy?
Frosted or printed film, integrated blinds or switchable glass that turns opaque at the press of a switch.
Are they safe?
We use tempered or laminated safety glass with manifestation markings so people notice the glass.
Can they be fire rated?
Fire rated partitions need certified systems. Tell us early and we will specify accordingly.
How long does installation take?
Usually days, not weeks, depending on size. Most work can be phased around your team.
Can we move them later?
Framed demountable systems can be taken down and rebuilt in a new layout.
Planning a project?
Share your drawings or opening sizes and we will recommend a system and prepare a quotation.